@Ogull i read the thread and didn't undestand a lot because of luck of info.

You said that many blocks that should be won by you a won by others. Can you just give us more info. In your screenshot we can't see anything. So please give us more so we can talk about it.

1. Which exactly block you say was stolen by you?
2. What was your DL's for that blocks?

• we will see after that who really won that blocks and with what DL's.

3. In what pool you were when this happend?

In addition is good to know that you can be beated by other miner with worst DL if he is faster than you. I have cases when my confirmed DL from the pool was 227sec. and was beated by 240 sec. But again this is normal because the other miner is broadcasted the his DL earlier than me.
But that could happend only with closer DL's

If you a beaten from DL's that are minutes worst than yours than you should be worried and look in your stuff:

1. IS your clock synchronized!
2. Make sure that your pool is confirming your DL's. If you send DL and the pool don't confirm it than the problem is in the pool.

So be more specific if you want to dig in the case. Make screenshots of your miner with send and confirmed DL's, so we can check your situation.

Cheers.

@zapbuzz thanks for info.

It looks like the problem was cheap usb hub bought from China.
I connect the hard drive directly to pc's usb and the plotter work just fine for now.
Maybe the Converter is good too,but this fuc...ing chinese hub screw all the idea, and converter was stopped and plot file distroyed.

SO please becareful when you deside to convert or replot your drives.

Chears.

This plotter stops few times for 1 hour with error 121.
I am not sure where is the problem - with the plotter or my disk.
Anyone else with same problem?

Great @luxe. Thank you. That was exactly what i need it to know.

Hello. I desided to start converting my plot files,
But the converter from https://github.com/JohnnyFFM/Poc1to2Converter/releases
after starting it, it works 5 minutes, than stopped without doing nothing.

I was enforced to replot my file with xplotter and downloaded forked version from: https://github.com/JohnnyFFM/XPlotter/releases

but when i started it, on main screen it says: POC 2 not activated.

My RunThisAsAdmin is:

@setlocal
@cd /d %~dp0
XPlotter_avx2.exe -id 12185455718063254096 -sn 1065100001 -n 19075000 -t 2 -path T:\Burst -mem 4G
@pause

.....................

So where to put activation for POC 2???

You should configure your miners to the pool max deadline.

Other thing is to make proxy configuration to one of the miners. Then you will send only once Deadlines to the pool with lowering times.

One fast question?

Is network difficulty a real physical Tb's in hard drives all over the world?

Or it's just a number that is controlled by the network in order to forge blocks every 4 minutes??

We know that when Net Diff is going up, the Base target is going down. Also when we have fast blocks with DL< 4 min, the Net diff for the next block is always higher number than the previous.

So Real TB or number controled by Network? If is network controlled, that could explain large jumps with over 50-60 PB between 2 blocks for just 10 sek.

@bitaroll said in AnyChanger.com | Cryptocurrency Exchanger:

Another 46.50$ PayPal to Burst Trade completed

That destination is not even shown in the site. No info for fees, proccesing time, Contact form!!!
Very scamy alerts. I'm just curios- why to run a site when it's not ready for customers???

Hmmmm....