Miner says plot file not found
a2s last edited by
Miner says plot file not found cant recognize the problem.
This is my config setting for plots
I have tried 2 miners - Blago & Creep both says plot file not found
The plotter I used is turbo plotter
DataArk last edited by DataArk
Have you tried dragging the plot files into turbo plotter, it will then scan the plot for errors if all the boxes are green then all good :D
Skip to 17:30 in this video explains how to do it.
Energy last edited by Energy
Marc last edited by
As energy says, the most common error in configuring is missing a semicolon
where the paths are defined.
Compare your line with the snipped energy has given, difference is the semicolon at the end of the line.
Add it - and it will work.
Or, if you're using the most recent version of TurboPlotter (0.9), it plots PoC2 by default - and I don't think CreepMiner can use PoC2 plots until block 502000. You could try changing 'use_poc1_format' to true in the config.yml file of turboplotter, generate a tiny plot file and see if your miner can see it then.
Of course it's due to switch over to PoC2 anyway in about a week, but CreepMiner will be able to translate PoC1 plots to PoC2 (it will just be a bit slower).
Cybermancer last edited by
you can use the POC2 compatible Blago Miner here https://github.com/JohnnyFFM/miner-burst/releases
tinycoins last edited by tinycoins
Also CreepSky just released a new version of creepminer - I'm generating a small poc2 plotfile now to see if it gets read.
Confirmed - use version 1.7.17 from here: https://github.com/Creepsky/creepMiner/releases
It can use PoC2 plots right now, and should be able to use PoC1 plots in the future while you get on with your conversion!
a2s last edited by
@tinycoins Thanks it helped
By the way 1.7.18 crashes with a segmentation fault when it's pointed at any file which is not a valid plot file, so upgrade to 1.7.19 if you're going to be doing poc2 conversions.